Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
1. Control Buttons
2. Water Tank Cover
3. Front Panel
4. Back Panel
5. Front Grill
6. Water Level Window
7. Water Funnel
8. Adapter
9. USB Cable
10. Temperature Display
11. Light Button
Choose your light color by pressing button You can choose between solid colors or a color-cycle mode.
COLOR ORDER:
Step 1: pressing button 1 sec.,color cycle / Step 2: pressing button 2 sec., color remains / Step 3: pressing button 3 sec., the
light turns off
12. On/Off Button
Press the button 2 seconds to power on the air cooler, the temperature display will show environment temperature.
13. Cooling Mode
You can choose from level 1 and level 2 mode.
The indicator lights around the button show you which level.
14. Fan Speed Button
The device has 5 different fan modes.
Airflow speed indicator light
NOTE: We recommend running the air cooler on HIGH mode for at least 5 minutes before powering off to allow it to dry
Maintenance
We recommend cleaning the water tank and the inside of the unit once weekly Use only a non-abrasive cloth and mild dish
soap when needed For best results, we recommend changing the filter every 6 months
Changing the filter:
I. Unplug the air cooler from the wall.
II. Gently press in the release tab on bottom of the front grille and pull the grille down and away from the unit. Set it aside.
III. Grab onto the filter and carefully slide it out of the unit
completely.
IV. Place a new filter in the air cooler as shown by the markings
on the filter.
V. Insert the top tab of the front grille into slot, and press the release
tab back into place.
Technical Information
Power Rating: 4,3 | 4,9 | 5,9 | 7,5 | 8 W
Service Value:
17 (m³/min)/W
Fan Sound Power Level: 27 | 29 | 31 | 34 | 35 dB(A)
Max. Fan Flow Rate: 2,05 m³/min
Stand By Power Consumption:
Max. Air Velocity: 2,2 |2,6 | 3 | 3,3 | 3,4m/s
0,12 W
Publicidad
