Publicidad
Idiomas disponibles
Idiomas disponibles
Keep all safety instructions and instructions for future reference.
Care
Only clean the device when it is switched off and with the mains plug unplugged. Use a soft, lint-free cloth. This can be
slightly moistened if necessary. Avoid contact with electrical components and moisture. After cleaning, allow the device to
dry completely before putting it back into operation. Do not use aggressive cleaning agents.
Commissioning
Before commissioning, please check the correct installation of the protective screens again; there is a risk of injury if they
are not installed correctly. Generally, the device may only be operated when completely assembled. Make sure that the
connected supply cable is free of damage. Never operate a device with a defective supply cable. There is a risk of electric
shock. Position the device upright and stable. When positioning the fan, make sure that curtains or other objects do not
obstruct the air flow. Insert the power plug into a properly fused power socket.
Assembly
1. Front Guard
2. Fan Blade
3. Nut
4. Back Guard
5. Coupling
6. Base
a) Place the Back Guard (4) on the Fan Head, ensuring the wire handle on the back of the guard is at the top.
b) Screw the Plastic Nut (3) to secure the Back Guard (4).
c) Place the Fan Blade (2) onto the motor spindle.
d) With the help of another person, position the front guard (1) against the back guard hold both guards together and close
the clip . At the end tighten the screw and the nut at the bottom of the guard.
Technical Information
Power Rating: 20 W
Service Value: 1,92 (m³/dak.)/W
Fan Sound Power Level: 49,5 // 55,5 dB(A)
Max. Fan Flow Rate: 40,23 m³/min
Stand By Power Consumption: 0 W
Max. Air Velocity: 2,18 // 2,36 m/s
Publicidad
