SPECIFICATIONS
Aqua 3 3000 LED
Maximum Operating Pressure ..................................690 kPa (100 psi)
Minimum Operating Pressure .....................................103 kPa (15 psi)
Maximum Water Temperature .........................................38°C (100°F)
Minimum Water Temperature ..............................................4°C (40°F)
Rated Service Flow .............................................2.65 LPM (0.6 GPM)
Combined Media Filter Capacity ....................... 11,355 L (3,000 GAL)
Replacement Cartridge ................................ CMF Cartridge # S8068
......................................................................................
This water treatment device is intended for non-commercial use on
municipally treated tap water. Do not use with water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after
the system. The Aqua 3 3000 LED Water Filter is designed for filtering cold
water only. The Aqua 3 3000 LED is certified for cyst reduction and may be
used on disinfected waters that may contain filterable cysts.
The specifications, model number and serial number for your filter are
indicated on the specifications label on the bottom of the unit.
NOTE: The warranty is void if the specifications label on the unit is removed.
REPLACEMENT PARTS
NOTE: Always use genuine Rena Ware replacement parts
Contact your Rena Ware Representative or the Rena Ware Customer Service
Center near you to order replacement parts for your Aqua 3 3000 LED
Ceramic Water Filter. You may also visit Rena Ware on the worldwide web at
www.renaware.com for information on our Service Centers and products.
Rena Ware reserves the right to change the appearance of, or make any
alterations to the model shown within. Therefore your model may appear
slightly different from the illustrations in this booklet.
Rena Ware International, Inc.
15885 NE 28th Street
Bellevue, WA 98008
(425) 881-6171
12
(USA # 14868)
MADE IN U.S.A.