Publicidad
17
Technical Information
MoniTorr
Figure 36
Select the Setup option and the program displays the following:
Figure 37
Select the COM port of the computer being used and then check
whether or not all the other parameters are the same as those shown
in the example. It is also very important to have the same configu-
ration for the Remote Echo option.
At this point save the Setup and exit from the program. Exit also
from the FileDownload program. The program will be reconfigured
the next time the computer is restarted.
Modifying the Parameters
The operator can change the configuration of the MoniTorr
parameters. To change the configurations select one of the MoniTorrs
connected to the network by positioning the cursor in the row of the
MoniTorr to be modified and clicking the left mouse button. Then
click the right mouse button, select Remote Device and then Set
Counters. You are now prompted to enter a password; the password
to be entered is: AGILENT.
342/374
Turbo-V 3K-G Pumping System User Manual / 87-901-011-01
(C)
Publicidad
