Cleaning And Maintenance; Technical Specification; Environmental Conditions; Applicable Standards - HEINE OPTOTECHNIK OMEGA 500 Manual Del Usuario

Cleaning and maintenance

• Before cleaning, disconnect from the power source.
• Use only a suitable cloth to wipe the surfaces of the instrument.
• The instrument may be wiped clean with a damp cloth. Any cleaning agent
used must be suitable for use on plastic surfaces.
• An alcohol-based surface disinfectant can be used to clean the instrument.
• The use of a spray disinfectant and soaking or disinfection in a machine are
not permitted.
• Check the correct operation of the HEINE OMEGA 500
• Use the instrument only when you are sure that it is operating correctly.

Technical specification

Power/current consumption:
Duration of use with 10 W-lamp: 2 h with HEINE mPack
Duration of use with 5 W-lamp:
Weight:

Environmental conditions

Normal use:
Storage:
Transport:
Relative humidity:
Air pressure:

Applicable Standards

IEC 60601-1: 1996 (Medical Electrical Equipment – General Requirements for
IEC 60601-1-2
ISO/DIS 10943
11 W (with 10 watt lamp)
5.5 W (with 5 watt lamp)
1 h with HEINE mPack
4 h with HEINE mPack
2 h with HEINE mPack
470 g (Instrument)
+10 °C to +40 °C
+5 °C to + 45 °C
– 20 °C to +45 °C
10 % to 75 %
700 hPa to 1060 hPa
Safety)
(MEDICAL ELECTRICAL EQUIPMENT – PART 1:
GENERAL REQUIREMENTS FOR SAFETY 2. COLLATERAL
STANDARD: ELECTROMAGNETIC COMPATIBILITY –
REQUIREMENTS AND TESTS)
(indirect opthalmoscopes)
at regular intervals.
®
®
UNPLUGGED
®
®
UNPLUGGED
®