Vimar ELVOX TVCC 46260.10P.02 Instrucciones Instalador página 7

46260.10P.02
Specifications
Element
Downlink ports
Uplink ports
Network standard
Switching capacity
Package forwarding speed
Type of exchange
Buffer memory
MAC address list
Standard PoE
PoE mode
PoE power supply
PoE output
CCTV mode
Immunity to transient overvoltages
Protection from electrostatic discharge (ESD)
Switch input voltage
Power supply input voltage
Power consumption
Operating temperature
Storage temperature
Operating humidity
Size (LxDxH)
Material
Weight
Troubleshooting
Run the following checks in the event of incorrect operation:
- Check that the installation is correct;
- Check that the order of the RJ45 cable conductors conforms to industrial standards EIA/TIA 568A or 568B;
- The electrical power supply from each PoE port does not exceed 30 W; do not connect a PoE device with greater power than the
maximum PoE electrical power supply;
- Replace a faulty device with a correctly operating one to check if the device is faulty;
- If the problem persists, contact the technical assistance service.
Description
8 Ethernet ports, 10/100/1000 Base-T (PoE)
2 Ethernet ports, 10/100/1000 Base-T
Supports IEEE 802.3/802.3u/IEEE802.3ab/IEEE802.3ab
20 Gbit/s
14 Mp/s
Store and Forward
1 M
4K
802.3af/at(PSE)
End-span
1/2(+) , 3/6(-)
Single PoE port output ≤30 W (54V c.c.), whole device PoE output ≤120 W
The downlink ports communicate only with the uplink ports
6 kV:
Contact discharge 6 kV, Air discharge 8 kV, according to: IEC61000-4-2
54 Vdc - 1.11 A
100-240 V, 50/60 Hz, 2 A
5 W
-10 °C ~+45 °C
-40 °C ~+85 °C
5%-95% (non-condensing)
200 mm×101.8 mm×27 mm
Metallic
500 g
EN
7