Setting Wpa/Wpa2; Guest Access (Optional) - Belkin F5D7230-4 Manual Del Usuario

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface

Setting WPA/WPA2

1.
Select "WPA/WPA2-Personal (PSK)" from the "Security Mode" drop-
down box.
2.
Select "WPA-PSK" for just WPA authentication, or "WPA2-PSK"
for just WPA2 authentication, or you may select "WPA-PSK +
WPA2-PSK" for WPA and WPA2 as the authentication type.
3.
Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same
key must be used on all of the clients that you set up. This pre-
shared key will allow users full access to your network including
shared files and printers.
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings depending on the type of access you want
them to have.

Guest Access (Optional)

The guest pre-shared key allows guest users an Internet-only access to
restrict them from entering your network and having access to files on
your PCs. Enter your pre-shared key for guest access. This can be from
eight to 63 characters and can be letters, numbers, or symbols. Click
"Apply Changes" to finish.
56 56