Reset and reinstatement of default settings
Press the
,
Caution: all the previously set parameters and customised programmes will be
cancelled.
When it is turned back on, the timer-thermostat will use the default factory settings. The
timer-thermostat will be set to heating, in OFF mode and the Party and Holiday functions
will not be enabled.
USER INSTRUCTIONS
Low Battery indicator
When the batteries are low and there is not bus power
the
symbol will start to flash on the screen. The
temperature indications also disappear from the screen
and it is necessary to replace the batteries as soon as
possible.
When the
essential to replace them immediately.
The batteries are only used to preserve the time and date
settings when there is no bus KNX/EIB power (all the other
settings are stored in the non-volatile memory).
When the bus power is present it will always function
even without batteries.
and
keys all together to completely rest the timer-thermostat.
symbol is ON with a fixed light, it is
60