Removing Infant Car Seat From Stroller; Folding Stroller With Icsa Attached - B.O.B Duallie Guia Del Usuario

6� Adjust restraint belt
Pull on red ring to remove slack
from the restraint belt.
7� Raise stroller seat
Raise the stroller seat back until
it makes contact with the infant
car seat (see stroller user guide if
necessary).
Removing Infant Car
Seat from Stroller
1� Prepare stroller
Set parking brake, recline stroller
seat, rotate canopy towards
handlebar (see stroller user guide
if necessary).
2� Unfasten restraint belt
Unfasten buckle, place restraint
belt ends to sides of stroller seat�
Duallie Infant Car Seat Adapter for BRITAX/BOB
3� Remove infant car seat
Press the Click & Go release
lever and lift the infant car seat
away from the ICSA. (See infant
car seat user guide for specific
instructions.)
Folding Stroller with
ICSA Attached
1� Remove infant car seat
Remove infant car seat from ICSA
(see previous section).
2� Empty stroller
Remove contents from low boy
cargo basket and pockets.
3� Unbuckle seat retention strap
Unbuckle red seat retention strap
at back of stroller.
4� Fold handlebar
Squeeze both handlebar release
levers simultaneously (see stroller
user guide if necessary).
5� Rotate handlebar forward
Slightly rotate handlebar towards
seat and hold in place during next
step.
6� Lift red frame release handle
Using a short, quick tug, lift
red frame release handle up.
Keep tires on ground as stroller
collapses toward front wheel (see
stroller user guide if necessary).
9