Infant Car Seat Installation; Preparing To Attach Infant Car Seat - B.O.B Duallie Guia Del Usuario

2� Attach seat retention strap
Loop seat retention strap around
cross tube and secure with
buckle.
Correctly Attached Seat Retention Strap
IMPORTANT:
retention strap around or over
brake bar.
3� Unfasten restraint belt buckle
Unfasten buckle of restraint belt
and place buckle ends to the
sides of stroller seat.
4� Install ICSA
Push ICSA locking end caps
straight into receiver sockets fully.
Duallie Infant Car Seat Adapter for BRITAX/BOB
Brake
Bar
Do not loop seat
NOTE: Listen for click or snap
noise on each side.
CLICK
5� Verify proper installation
Pull on center of ICSA front tube
to verify ICSA is securely locked
into place.
Infant Car Seat
Installation
Preparing to Attach Infant Car
Seat
WARNING!
Failure to securely attach infant
car seat and properly secure
infant with seat harness of
infant car seat may result in
serious injury or death�
NOTE: When attaching infant car
seat to ICSA for the first time,
practice attaching and removing
unoccupied infant car seat several
times until the function becomes
familiar.
1� Place infant into infant car seat
Fasten harness securely (see
infant car seat user guide if
necessary).
CLICK
7