Extension Cords; Complete Overview; Appliance Diagram - CASO DESIGN FastVac 4004 Manual Del Usaurio

16.7.1

Extension cords

If an extension cord is used:
► The electrical rating of the extension cord should be at least as great as the electrical
rating of the unit.
► The cord should be arranged so that it does not drape over a countertop or tabletop
where it can be pulled on by children or tripped over.

17 Complete Overview

This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.
17.1 Appliance
diagram
11. Front handle: Press
down to lock the cover. And
lift to open the cover.
12. Air intake: Air intake
connects with vacuum
chamber and pump. Do not
cover this air intake when
placing bag for
Vacuum&Seal operations.
but not to stick to the strip. Place the bag over this sealing element for sealing it.
17. Upper gasket
18. Cutter: Press and slide in one direction or another to cut bags to a desired size.
19. Cutter rack
WARNING
Please observe the following safety notice to reduce the risk of burns.
► Never touch the sealing bar while the unit is operating.
13. Vacuum chamber:
Position the open end of the
bag inside the chamber.
14. Sealing profile Place
the bag to be sealed over
this profile.
15. Lower gasket
16. Sealing bar:
Contains a heating
wire covered with Teflon
which allows the bag to seal
39