Connecting External Liquid Supplies To The Washer-Extractor - Raytheon Commercial Laundry UW50PV Instalación Y Mantenimiento

Figure 11
F232051
Tubing from
Pump
Seal Nut
Tubing
Ring
Base
Lid
Nut
P016I1A
Installation
Connecting External Liquid Supplies
to the Washer-Extractor
1. Remove plugs from base. See Figure 11.
Plugs are assembled inside the tubing ring.
2. Install strain reliefs, included in the
seal nut.
3. Insert tubes through base. Do not remove
cups. Tube should extend into the plastic
cup, with the exception of the softener
tube, which should be routed to the
outside of the cup.
4. Tighten the seal nut to prevent tubing from
escaping the assembly.
The UW50PV, UW65PV, and UW85PV
machines have a polypropylene supply
dispenser. All UWPV models have five supply
compartments. See Figure 12.
Do not attempt to make chemical injection
electrical connections to points other than
those provided specifically for that purpose
by the factory.
Chemical Injection Supply System
Number of dry supply compartments
Number of liquid supply connections
Liquid supply connection size, in (mm)
UW50, 65,
5
5
5/8 (15.9)
33