Multi-Channel Operation - Sennheiser EM500 G2 Manual Del Usuario

Scan
Channel list
Scan new
Scan reset
1 2 3
Bank
20 20 17
Free
5 6 7
Bank
12 20 02
Free
Channel
1.01
786.300
B.CH
Scan
Channel list
Scan new
Scan reset
1 2
Bank
20 20 17
Free
5 6
Bank
12 20 02
Free
Scan
Channel list
Scan new
Scan reset
1 2
Bank
Free 20 20 18
5 6
Bank
16 20 15
Free
20
Displaying a list of all free channels
Via the "Channel
all channel banks.
Select the "Scan" menu.
Select "Channel
4
example list and may look different in other frequency ranges. The
11
number of free channels is displayed for all channel banks.
8 U
03 20
For further details, select a channel bank by using the
and then press the
MHz
where you can select a channel of this channel bank or display the
frequency of a channel.
Starting the scan
Before starting the scan, switch all transmitters of your system off, since
channels used by switched-on transmitters will not be displayed as "free
channels".
Select the "Scan" menu.
Select "Scan
Note:
3 4
The scanning process takes approx. 1 minute.
11
7 8 U
03 20
After the scan is completed, the number of free channels is displayed for
all channel banks. Channels that are used or subject to interference are
locked and cannot be selected. The same result is displayed when
selecting the
For further details, select a channel bank by using the
and then press the
where you can select a channel of this channel bank or display the
frequency of a channel.
Releasing locked channels
Select the "Scan" menu.
Select "Scan
The last scan result is deleted and all channels can now be selected again.
3 4
12
7 8 U
11 20

Multi-channel operation

Combined with ew 500 G2 transmitters, the receiver can form transmission
links that can be used in multi-channel systems. For multi-channel operation,
only use the free channels in a channel bank.
Before putting the transmission links into operation, we recommend
performing an auto scan.
Scan the receiver for free channels.
list" menu, you can display the number of free channels for
list" to display the last scan result. The illustrated list is an
SET button. This gets you into the "Channel" menu
new" and confirm your selection by pressing the
"Channel list" menu.
SET button. This gets you into the "Channel" menu
reset" and confirm your selection by pressing the
/ rocker button
SET button.
/ rocker button
SET button.