PR 9116 Manual Del Usuario página 65

Safety Manual
15
16
17
18
19
20
21
22
23
24
25
26
27
28
18
9116 UniverSal converter
Action
Verify CJC type and press OK
(ONLY if IN.TYPE = TEMP and SENSOR = TC)
Verify fixed input voltage range and press OK
(ONLY if IN.TYPE = VOLT)
Verify input resistance 0% range and press OK
(ONLY if IN.TYPE = LIN.R)
Verify input resistance 100% range and press OK
(ONLY if IN.TYPE = LIN.R)
Verify display units for 4501 and press OK
(ONLY if IN.TYPE ≠ TEMP)
Verify display decimal point for 4501 and press OK
(ONLY if IN.TYPE ≠ TEMP)
Verify display value for 4501 at 0% input and
press OK
(ONLY if IN.TYPE ≠ TEMP)
Verify display value for 4501 at 100% input and
press OK
(ONLY if IN.TYPE ≠ TEMP)
Verify relay setpoint units and press OK
(ONLY if IN.TYPE ≠ TEMP)
Verify relay function and press OK
Verify relay contact function and press OK
(ONLY if REL.FUN ≠ OFF or POW)
Verify relay setpoint and press OK
(ONLY if REL.FUN = SETP)
Verify low setpoint value and press OK
(ONLY if REL.FUN = WIND)
Verify high setpoint value and press OK
(ONLY if REL.FUN = WIND)
Version No. V3R0
Display shows
V.RANGE
R 0%
R 100%
UNIT
DEC.P
DISP.LO
DISP.HI
REL.UNI
REL.FUN
CONTAC.
SETP.
SETP.LO
SETP.HI
ACT.DIR