On-Screen Display; Navigating The Osd; Selecting A Computer; Osd Settings (F2) - Tripp-Lite NetCommander AGCB6533 Serie Manual Del Propietário

Operation

On-Screen Display

To invoke the OSD:
Press and release the Shift key twice to open the OSD Main Menu. Lines with Blue text
represent ports that have a computer/server connected to them, which is currently turned on.
Lines with Gray text represent ports that either has a computer/server connected to them,
which is turned off; or they have no computer/server connected at all. The Type column
indicates whether a computer/server (C) is connected to the port or a KVM Switch (S) is
connected to the port. For the Type column to display S, the user must change the Hotkey
setting for the cascaded KVM. (See page 14 for details.)

Navigating the OSD

To move up and down, use the [  ] and [  ] arrow keys.
To jump from one column to the next (when relevant), use the [Tab] key.
To exit the OSD or to return to the previous OSD window, press [Esc].

Selecting a Computer

To select a computer:
1. Move to the desired computer line.
2. Press the Enter key. The selected computer will be accessed and the OSD screen will close.
Note: While the OSD Screen is active the Keyboard Hotkey Commands and Mouse will be
deactivated.

OSD Settings (F2)

Press [F2] to open the OSD Settings window (see Figure 9).
Note: If the OSD is password protected, only the Administrator will be able to get access to
the F2 settings window by using the appropriate password.
12-10-052-933244.indb 11
(continued)
Figure 8 The OSD Main Window
Figure 9 The Settings Window
11
10/15/2012 2:58:35 PM