Safety Information - Detax implantlink semi Classic Modo De Empleo

saFety inFormation

Only for the specified intended use by trained specialists.
►
► Avoid direct contact with the uncured material.
► Wear personal protective equipment (protective gloves, goggles) when handling the uncured material.
In case of stiffness or clogging discard the cartridge; do not use force for application!
►
► Do not roughen or sandblast the surface of the abutment.
► When removing excess material, do not damage titanium surfaces underneath; possibly use plastic instruments.
Do not leave any cement residues of the material in the mouth or sulcus.
►
► Do not use adhesion-reducing additives.
Not suitable for temporary fixation of hybrid restorations made of natural abutment teeth and implant-supported restorations.
►
► Do not use adhesion-reducing additives.
► Manual withdrawal and mixing of the components is not recommended.
The fixation should be checked after approx. 3 – 6 months. After that, integrate the restoration definitely or again temporarily.
►
► Wear suitable personal protective equipment (protective gloves, goggles, face mask) during the finishing of the cured material.
► Refer to the relevant safety data sheet for hazard and safety information.
notes
► DETAX shall not be held liable for any damage caused by misuse.
Read and understand the safety data sheet!
►
For users and/or patients:
Any serious incident that has occurred in connection with this product must be reported immediately to incident@detax.de and to the
competent public authority of the country in which the user and/or patient resides.
11