Important Safety Instructions - Honeywell HV-140 El Manual Del Propietario

IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1
. Use this fan only as described in this
manual. Other use not recommended
may cause fire, electric shock or
injury to persons.
2. Do not use outdoors.
3. To protect against electric shock, do
not place fan in window, immerse unit,
plug or cord in water or spray with
liquids.
4. This fan requires a grounded 120 volt
power source (3 prong receptacles).
Never connect this fan to any power
source other than a properly grounded
120 volt AC receptacle. Do not attempt
to defeat this safety feature.
5. Close supervision is necessary when
any appliance is used by or near
children.
6. Turn the fan to the OFF position and
unplug the fan from the outlet when
not in use, when moving the fan from
one location to another and before
cleaning.
7. To disconnect the fan, first turn control
to the OFF position, grip the plug and
pull it from the wall outlet. Never pull
by the cord.
8. Do not operate the fan in the presence
of explosive and/or flammable fumes
9. Do not place the fan or any parts near
an open flame, cooking or other
heating appliance.
10. Do not operate the fan with a
damaged cord or plug, or if the
product malfunctions, is dropped or
damaged in any manner. (see
warranty)
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer
may be hazardous.
13. Place the fan on a dry, level surface.
14. Do not hang or mount fan on a wall or
ceiling.
15. Do not operate if the fan housing is
removed or damaged.
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the
plug. Contact a qualified electrician to
replace loose or worn outlet.
WARNING: To Reduce The Risk of Fire
or Electric Shock, Do Not Use This Fan
With Any Solid-State Speed Control
Device.