Unlocking The Mtp850; Locking/Unlocking The Keypad; Keypad Lock Notification; Automatic Keylock - Motorola TETRA MTP850 Guía Del Usuario Básico

The TXI Mode remains active at power On. You will be asked
whether to leave the TXI Mode On or not.
Press the Yes soft key to deactivate the TXI Mode. If the MTP850
was previously used in Trunked Mode, it will register to the network.
If the MTP850 was previously used in Direct Mode, it will remain in
Direct Mode.
Press No in Trunked Mode and the MTP850 powers down; press
No in Direct Mode and you remain in Direct Mode with TXI selected.

Unlocking the MTP850

Your MTP850 may be locked at power up.
To unlock the MTP850 after powering on, enter the code at the
prompt. The MTP850 enters the default Home display.
The unlock code is originally set to 0000. Your Service Provider may
change this number before you receive your terminal.

Locking/Unlocking the Keypad

To prevent accidental key/button presses:
Press
MENU
unlock. Service Provider can choose the notification for the Keypad
lock and if to lock the PTT.

Keypad Lock Notification

When the keypad is locked one of the following instructions is
displayed:
• None – no notification is display.
• Notification Only – Keys Locked is displayed.
Notification and Instruction – Keys Locked, Press Menu and * to
lock/unlock is displayed.

Automatic Keylock

This feature locks the keypad automatically after not using it for a
predefined time. To turn it on/off or to set the delay go to Menu >
Security > Keylock Setup.
Ensure you have left the RF sensitive area
before deactivating Transmit Inhibit.
to lock the keypad. Press again to
MENU
31