Making An Emergency Group Call; Silent Emergency Mode; Call-Out - Motorola TETRA MTP850 Guía Del Usuario Básico

Making an Emergency Group Call

• Hot Microphone enabled – to initiate an Emergency Group Call,
press and hold Emergency Button.
• Hot Microphone disabled – to initiate an Emergency Group Call,
press and hold Emergency Button. When the display has
changed to Emergency Group Call hold PTT and wait for talk
permit tone (if configured) and talk. Release the PTT to be able to
listen.

Silent Emergency Mode

Silent Emergency Mode needs to be enabled by the Service
Provider to be able to use it.
To enter Silent Emergency Mode, press Emergency button.
Silent Emergency Mode provides no audible and visible indication.
All of the key tones are switched off.
To exit Silent Emergency Mode, press
simultaneously or
Man Down
You can enable the Man Down feature in case of entering any risky
operation. It monitors the state in which the terminal is. The terminal
alerts you when:
• Its tilt exceeds a predefined angle value.
• It remains static for a predefined period of time.
Press
MENU
press
MENU
Additional audible and visual indications are available if enabled by
your Service Provider.

Call-Out

This feature allows the user to receive Call-Out alerts. When the
Call-Out messages has been received by the radio, it interrupts
current services and attends to the Call-Out alert without any further
delay. After Call-Out alert has been cleared, the radio exits Call-Out
mode and reverts back to normal mode. User is able only to receive
Emergency Calls during Call-Out mode. There are four types of the
Call-Out alert:
44
and then
MENU
and select Man Down > On. To disable the feature,
and select Man Down > Off.
and key
3
1
def
key within 3 seconds.