Hoover NEXTRA HNF6127 Manual De Instrucciones página 21

40002005Eng.qxd 04/10/2004
Fast Iron (
This option is only available on synthetics, acrylics, woolmark and silk
programmes.
Programme
Synthetics
50)
(
Acrylics
40)
(
Woollens
( )
Silk
( )
16:15 Page 21
)
Fast Iron Function
Programme is completed
by a short, very low spin
speed.
The machine stops in the
final rinse stage and the
option indicators
blink.The load is held in
the water in the drum,
thus reducing creasing
and enabling easier
ironing.
The machine stops in the
final rinse stage and the
option indicators
blink.The load is held in
the water in the drum,
thus reducing creasing
and enabling easier
ironing.
The machine stops in the
final rinse stage and the
option indicators
blink.The load is held in
the water in the drum,
thus reducing creasing
and enabling easier
ironing.
Action to complete the cycle
If a spin cycle is required please
select the appropriate spin (see
Programme Guide).
Press the button to continue
with the programme. The
machine will then pump out the
remaining water and the
programme will conclude with a
short spin. Finally, the
programme carries out a brief
tumbling action to loosen the
items in the load.
Press the button and the
machine will pump out the
water and complete the cycle
with a short spin cycle.
Press the button and the
machine will pump out the
water to complete the cycle. The
clothes load will not be spun and
will therefore be very wet.
21