Care And Cleaning; Troubleshooting - Kohler K-1737-K1 Guía De Instalación Y Cuidado

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
• Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit
www.kohler.com/clean. To order Care & Cleaning information, call
1-800-456-4537.

Troubleshooting

NOTE: For DTV+ system troubleshooting, refer to the guide on
the K-99695 controller product page at www.us.kohler.com.
NOTE: For service parts information, visit your product page at
www.kohler.com/serviceparts.
This troubleshooting guide is for general aid only. For service and
installation issues and concerns, call 1-800-4KOHLER.
Symptoms Probable Causes
1. Error 0140 is A. Tank water level is
displayed.
B. Tank temperature
Kohler Co.
Recommended Action
A. Inspect the water
too low (green inlet screen and clean
status light on if necessary. Ensure
steam generator is the water supply
on). valve is on and that
water is being
supplied to the steam
generator.
B. Call the Customer
limit has been Care Center using
exceeded (green the information
status light on provided on the back
steam generator is page of this manual.
off).
15 1235393-2-C