Kohler K-3398 Manual De Instrucciones página 12

Modular Plug
Trip Button
6. Connect Wiring to the Trip Button
CAUTION: Risk of property damage. Ensure that the trip
button plug is completely dry before reconnecting. If it has been
submersed, wipe it down with a dry rag and let it dry.
Perform the following steps to reconnect the trip button wire to the
trip button:
Unplug the electrical plug for the toilet from the outlet.
Remove the tank cover.
NOTE: The modular jack and plug are similar to a modular
telephone jack and plug.
Align the modular plug into the modular jack of the trip button.
Push the plug into the jack until it snaps into place.
Position the wire so it is above the full water level in the tank.
Plug the electrical cord for the toilet into the receptacle.
Test the toilet for proper operation.
Replace the tank cover.
1013091-5-B 12 Kohler Co.