Heat Mode (Proheat Ii And Proheat Ii Chiller Models); Cool Mode (Proheat Ii And Proheat Ii Chiller Models) - fluidra 65542 PROHEAT II 35KW Manual Técnico, Arranque Y Funcionamiento

PROHEAT II SERIES · AIR/WATER SYSTEM
temperature is lower than the "Setpoint temperature". The machine starts heating when the
probe temperature is lower than the "Temperature setpoint - Auto mode temperature
differential" and it stops heating when the temperature is higher than the "Setpoint
temperature".

6.4.2. HEAT MODE (PROHEAT II AND PROHEAT II CHILLER MODELS)

Start-up process:
Start-up conditions: Water intake temperature < (Setpoint temperature - Temperature
differential); and the Compressor stop time ≥ Compressor delay time

6.4.3. COOL MODE (PROHEAT II AND PROHEAT II CHILLER MODELS)

Start-up process:
Start-up conditions: Water intake temperature < (Setpoint temperature + Temperature
differential); and the Compressor stop time ≥ Compressor delay time
© FLUIDRA 2016 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
ENGLISH
Pag: 22