Display Functions; Time Setting - fluidra 65542 PROHEAT II 35KW Manual Técnico, Arranque Y Funcionamiento

PROHEAT II SERIES · AIR/WATER SYSTEM

DISPLAY FUNCTIONS

1. Heart pump ON/OFF
Press to switch the machine ON and OFF.
2. Water temperature setpoint setting
•
Press to access the water temperature setpoint for the pool.
•
Change the setting by pressing
the process.
•
After changing the setting, press
setting, press

3. Time setting

•
Press to set the time.
•
Change the time using
.
• After setting the time, press
4. Timer setting (SCHEDULE PROGRAMMING MODE)
•
Press for at least 2 seconds to activate the SCHEDULE PROGRAMMING mode.
•
Press for at least 5 seconds; this will display the start and end times of the first
period.
•
Change the start hour of the first period using the
set the start minutes of the first period, using
end time of period 1, using
period 1, using
© FLUIDRA 2016 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
or . Keep these buttons pressed to speed up
again to save the change. To exit the setpoint
.
or . Press
again to exit the time setting menu.
or . Press
or .
ENGLISH
to adjust the minutes, using
or keys. Press
or . Press
to set the end minutes of
or
to
to set the
Pag: 32