Button Panel Settings Page; Door Unit Type: Main - Urmet 1083/48 Manual De Instrucciones

• The SETTINGS
After selecting the operating language with the icon
the door unit and access the following pages:
– BUTTONS
(*) Depending on the parameters previously entered.
– TRANSFER
– V.x.y/w(**) (e.g.
audio-video door unit.
(**) V.x.y is the SW version of the web application, while w is the FW version of the door unit.
• After completing the changes, save and send the configuration to the device with the control
The browser returns the following screens:
• By pressing on
• In the meantime, the device has rebooted.

3.2 BUTTON PANEL SETTINGS PAGE

The following default settings will be present at the opening of the web page:

3.2.1 DOOR UNIT TYPE: MAIN

All parameters are described below:
The parameters marked with (#) are displayed only if the door unit is an audio-video model (Ref. 1083/48).
The parameters marked with (&) are displayed only if the door unit is an audio model with CCTV
(Ref. 1083/39).
DS1083-099
web page will open.
: to consult/change(*) the button allocation to the columns in the system.
: to save/import the configurations set on the device.
): to see the firmware version of each single device connected to the audio or
on the TRANSFER
1)
the controls
is returned, therefore close the browser.
at the top left, you can configure all the parameters of
web page.
)
, the web page with the indication
17