Features - Tripp-Lite PDUMVR20NET El Manual Del Propietario

Features

IEC-60320-C13
IEC-60320-C19
13-02-027-933161-revB.indb 9
Outlets: During normal operation, the outlets distribute AC power to
connected equipment.
5-15/20R
Outlet LED: Once the unit is powered-on, each outlet individually ramps
up and each outlet LED will illuminate when the associated outlet is ready
to distribute live AC power.
Circuit Breaker (select models): Each bank has its own breaker labeled
Bank 1 and Bank 2. If the connected equipment load exceeds the
Maximum Load Rating for that bank of the PDU, the circuit breaker will
trip.
Circuit Breaker (Select Models): If the connected equipment load
exceeds the Maximum Load Rating of the PDU, the circuit breaker will
trip. Disconnect excess equipment and allow the breaker to cool before
depressing the plunger to reset the breaker.
Cord Retention Bracket: Provides secure attachment points for
connected equipment cords.
Mounting Buttons: Come pre-installed on the back side of the PDU and
are used for toolless mounting. Note: Four additional mounting buttons
are included for alternate rack styles.
PDUMVROTATEBRKT Mounting Accessory: Use these V-shaped
brackets to mount the PDU with its outlets facing the rear of the rack.
Ground Screw: Use this to connect any equipment that requires a
chassis ground.
9
2/7/2013 1:19:18 PM