Operation; Adjusting Table Sections - Chattanooga Triton DTS TRT-600 Manual Del Usuario

OpErATiON

AdjuSTiNg TABLE SECTiONS

•
When making adjustments to the table sections, make certain the
patient is removed before adjusting.
•
Never place your hands or feet near the working mechanism of
the table when making any and all adjustments to height or table
sections. Moving parts could cause pinch points.
Elevating / Lowering the
Head and Chest Section
Support the Head and Chest
Section by holding on to the
cushion.
Pull up the Head and Chest
Section Control Lever.
Raise or lower the Head and
Chest Section to the desired
elevation.
NOTE: The Head and Chest Section
can be elevated up to 45° and
lowered down to -15°.
Release the Control Lever to lock
the section in place.
15
®
Triton DTS TRT-600 Spine Therapy Table
Positioning the Face Cradle
Cushion
For Prone Position: Pull the Face
Cradle Cushion from the Face
Cradle Platform. Remove the Face
Cradle Platform Insert. Place the
Face Cradle Cushion back onto the
Face Cradle Platform.
For Supine Position: There is the
option to remove the Face Cradle
Cushion for patient comfortability.
Tilting the Face Cradle Platform
Turn the Face Cushion Knob,
located at the top of the Head and
Thoracic Section, and adjust the
Face Cradle Platform to the angle
desired.
NOTE: The Face Cradle Platform
tilts up from 0° - 30°.