macchine agricole
1.2.1 WARRANTY EXCLUSIONS
(Besides the circumstances indicated in the supply contract) the warranty becomes void:
▪
When the damage can be ascribed to insufficient maintenance.
▪
When, following repairs made by the user without the Manufacturer's consent or owing to the installation of spurious spare
parts, the machine has been subjected to changes and the damage is ascribable to these changes.
▪
When the machine has been hitched to tractors whose power rating exceeds the value given in the "Technical Specifica-
tions" table in this manual.
▪
When the user has failed to comply with the instructions in this manual. Damage deriving from negligence, carelessness,
bad and improper use of the machine or incorrect manoeuvres by the operator are also excluded from the warranty. Remo-
val of the safety devices with which the machine is equipped shall automatically void the warranty and relieve the Manufac-
turer from all relative liability. The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be returned Carriage Free.
1.3 DESCRIPTION OF THE MACHINE
76
t
sr
The
cutter bears «CE» marking in compliance with the European Union standards described in directive 98/37/EC and suc-
cessive modifications, as stated in the declaration of conformity with which each machine is equipped
1
12
1.
Framework
2.
Three-point hitch linkage
3.
Machine lifting point
4.
Driveline support
5.
Overdrive unit
6.
Side drive shaft
7.
Side transmission unit with belts
8.
Work depth adjuster slide
9.
Safety protections
10.
Power take-off
11.
Driveline shield
12.
Lower 3-point hitch
13.
Hammer
14.
Universal knife
15.
Identification plate
76
t
sr
3
2
11
10
9
Fig. 1
- 20 -
4
5
6
8
13
7
15
14