1.2.1 WARRANTY EXCLUSIONS
(Besides the circumstances indicated in the supply contract) the warranty becomes void:
▪
When the damage can be ascribed to insufficient maintenance.
▪
When, following repairs made by the user without the Manufacturer's consent or owing to the installation of spurious spare
parts, the machine has been subjected to changes and the damage is ascribable to these changes.
▪
When the machine has been hitched to tractors whose power rating exceeds the value given in the "Technical Specifica-
tions" table in this manual.
▪
When the user has failed to comply with the instructions in this manual. Damage deriving from negligence, carelessness,
bad and improper use of the machine or incorrect manoeuvres by the operator are also excluded from the warranty. Remo-
val of the safety devices with which the machine is equipped shall automatically void the warranty and relieve the Manufac-
turer from all relative liability. The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be returned Carriage Free.
1.3 DESCRIPTION OF THE MACHINE
180
The
power harrow bears «CE» marking in compliance with the European Union standards described in directive 98/37/
MekFold
EC and successive modifications, as stated in the declaration of conformity with which each machine is equipped.
1.
Rear roller (tines, cage, packer)
2. Work depth adjuster ram
3.
Rh harrow unit
4. Side final drive
5.
Lh harrow unit
6. Driveline shield
7.
Side driveline
8. Hydraulic cylinder to open/close harrows
9. Connection point to lift the machine
10. Central bearing frame with three-point hitch
11. Upper 3-point hitch
12. Identification plate
13. Side strip
14. Blade rotors
15. Central share
16. Central transmission unit
17. Lower 3-point hitch
18. Driveline support
19. Power take-off
20. Pipes to connect to hydraulic circuit of tractor
180
MekFold
Fig. 1
- 19 -
macchine agricole
12