SICK EuroFID3010 Inline UEG Instrucciones De Servicio página 152

22 EPROM_ERROR
ROMRAM_E-
23
RROR
RAM_RW_E-
24
RROR
25 FLASH_RAMERR
26 ANAPARRAMERR
27 RAMCLOCK_ERR
28 Anal. Restart
29 EPROMANAERR
30 RAM_ANA_ERR.
31 NVRAMANAFEHL
152
SYSTEM ERROR
Cycl. test.
EPROM memory test
Error occurred during EPROM read.
SYSTEM ERROR
Cycl. test. Error occurred during
program code test between
EPROM and RAM.
SYSTEM ERROR
Cycl. test. RAM memory test.
Error occurred during RAM read/
write
SYSTEM ERROR
Cycl. test.
Error in operating unit parameters
when comparing FLASH EEPROM
and RAM.
SYSTEM ERROR
Cycl. test.
Errors in analyzer parameters in
RAM.
SYSTEM ERROR
Cycl. test.
Clock parameters and RAM data
are no longer identical.
MESSAGE
There is an error in the
microprocessor of the analyzer
unit.
SYSTEM ERROR
Cycl. test.
EPROM memory test
Error occurred when reading
EPROM in analyzer unit.
SYSTEM ERROR
Cycl. test.
RAM memory test
Error reading from / writing to RAM
in analyzer unit.
SYSTEM ERROR
Cycl. test.
NVRAM memory test
Error reading from / writing to
NVRAM in analyzer unit.
EuroFID3010 Inline UEG · Instrucciones de servicio · 8017004/ZXA4/V2-2/2018-04 · © SICK AG
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Apagar el EuroFID3010 Inline
UEG y encenderlo de nuevo.
Fallo Si esto no ha servido de ayuda:
▸
Notificar el Servicio al cliente
de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Solo archivo de Notificar el Servicio al cliente
errores de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
▸
Notificar el Servicio al cliente
Fallo
de SICK.
Solución de problemas