Milnor 48040F7J Manual Del Usuario página 28

Chapter 3. Routine Maintenance
Table 7: Motor Grease Schedule. Use the data in
Motor Identification
(example: main drive)
Table 8: Mechanisms and Settings
Make sure mechanisms are serviceable and settings are correct to prevent unsatisfactory
Mark
Do this each
1 2 3 4 5 6
x 2400 hours
x 200 hours
x 200 hours
x 200 hours
x 200 hours
x 200 hours
PELLERIN MILNOR CORPORATION
Section 3.1.4.3
Interval Quantity
Years Hours fl oz mL
performance.
Component
controller circuitry
water pressure regulator for
optional supply injector
water pressure regulator for
chemical flush
compressed air mechanisms
bath level sensor that uses air
pressure
air pressure for bearing
housing
24
to complete this table.
Dates When Grease is Added
More Data
Examine wiring and connections in electrical
boxes. Look for corrosion, loose connections.
See Section 3.1.3
See Figure 9. Value: 28 PSI (193 kPa).
See Figure 11. Value: 28 PSI (193 kPa).
See Supplement 2, Figure 15
Examine the air tube and connections. See
Figure 10
See Figure 14 Value: 10 PSI (69 kPa)
.