Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Machines that use a spring to hold tension on the motor base—Use the belt tension sleeve
supplied with the machine. Put the sleeve on the rod that the spring is attached to or remove
the sleeve to increase or decrease tension. Replace the spring if necessary.
Figure 7: Electric Box and Inverter. These are examples. Your machine can look different.
30022X_ Washer-extractor
1.
Air filter
2.
Fan on elecrtric box door. Tip: Put streamers in front of the fan to make sure the fan operates.
3.
Inverter cooling vanes and vents. See
4.
Braking resistor, if applicable
.
CAUTION
22 : Risk of damage—The inverter will burn out without sufficient airflow.
• Keep fans, filter, vents, and braking resistors clean.
48040F_ Washer-extractor
Legend
caution statement 22
31
Chapter 3. Routine Maintenance
76039 CBW Tunnel Washer
.
PELLERIN MILNOR CORPORATION
Publicidad
Tabla de contenido
