Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PEAK HOLD MODE
Deleting a Peak Hold Value:
1. Repeat steps 1 through 3 from "Viewing Peak Hold
Values". Then, using the
to the location you wish to delete.
2. Press the
button.
"No?" appears in the display.
3. Press the
button again.
"dEL" appears in the display, and this action deletes
the current entry.
4. The preceding memory location and torque value will
now alternate on the display.
5. To exit press the
Note: The display will automatically return to the
location that preceded the one deleted. For example,
If location 15 (n015) was deleted from memory,
the display would then show (n014) location 14.
When a stored value (location number) is removed from memory, the subsequent location numbers are reassigned. If
location 3 is deleted, the value that was in location 4 moves down one slot and becomes value 3. The value in location
5 moves to 4, etc.
Deleting all Peak Hold Values:
1. Repeat steps 1 through 3 (Viewing Peak Hold Values").
2. Press the
button; "cLrA" appears in the display.
3. Press the
button; "no?" appears in the display,
4. Press the
button; "dEL" appears in the display
followed quickly by "no-0" alternating with "0000".
5. Press the
button; "ConU" appears in the display
6. Press the
button again to return to the opening/
start display screen.
DTW38FL, DTW12FL
buttons, navigate
button four (4) times.
OPENING/START DISPLAY
11
Rev. 01/23/13
Publicidad
Tabla de contenido
