HAMPTON BAY COBRAM 48 Guía De Uso Y Cuidado página 7

Assembly — Hanging the Fan
1
Attaching the mounting bracket to
the electrical box
WARNING: To reduce the risk of fire, electric shock, or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support
□
Attach the mounting bracket (B) to the outlet box with
two screws and washers provided with the outlet box.
Make sure the mounting bracket (B) is tightened
securely.
2
Attaching the downrod to the
fan motor assembly
□
Loosen the two set screws (JJ) from the fan motor
assembly (H) coupling.
□
Remove the hitch pin (GG) and lock pin (HH) from the
downrod (F). Remove the hanger ball (E) from the
downrod (F) by loosening the hanger ball set screw (II),
and removing the cross pin (FF), then sliding the hanger
ball (E) off of the downrod (F).
□
Carefully feed the fan wires up through the downrod (F).
Thread the downrod (F) into the fan motor assembly (H)
coupling. Line up the holes and replace the lock pin (HH)
and hitch pin (GG). Tighten the set screws (JJ).
FF
B
GG
7
Please contact 1-855-HD-HAMPTON for further assistance.
II
F
E
HH
JJ
H
H A M P O T N B Y A C . O M