Settings Menu; Answering A Call; Pairing The Indoor/Outdoor Units; Pairing An Additional Monitor (Not Included) - Byron DIC-22815 Manual De Usuario

Instruction manual
4.3

SETTINGS MENU

In the standby mode, first press the intercom/monitor button and then
the ok/menu button to open the main menu. Use the directional keys
to navigate through the different settings. Press the ok/menu button to
select the highlighted submenu.
1. Camera pairing

2. Image setting

3. Volume control
4. Music setting
5. Play back
6. Rec/snap
7. Time setting
8. Unlock time setting
9. Exit
4.4

ANSWERING A CALL

When the doorbell rings, you can:
A. Press the camera button to make a video or take a picture.
B. Press the lock button to open the door (optional).
C. Press the gate button to open the gate (optional).
D. Press the talk button to talk to your visitor.
4.5

PAIRING THE INDOOR/OUTDOOR UNITS

ü Before you can use the product, the indoor and outdoor units
need to be paired. Follow below procedure for pairing.
A. Press the power button on the indoor unit until the LED turns on.
B. Press the menu button.
C. Select the pairing icon.
10
D. Press the ok/menu button to confirm.
E. Press left/right button to select the doorbell/monitor icon.
F. Press the ok/menu button to confirm.
G. On the screen you will see that the indoor unit is now in pairing
mode. Press the doorbell button for a couple of seconds and the
outdoor and indoor unit will now be paired.
4.6 PAIRING AN ADDITIONAL MONITOR
(NOT INCLUDED)
An additional monitor (DIC-22805) can be connected to the system.
To link this to the system, follow the steps below:
A. Power on the indoor unit that already has been successfully
paired with the outdoor unit and enter the pairing interface.
B. Use the left or right button to select the (1) icon.
C. Press the menu/ok button to confirm.
D. Power on the additional monitor and enter the pairing interface.
E. Use the left or right button to select the (2) icon.
F. Press the menu/ok button to confirm.
4.7 IMAGE SETTING
The image settings available consist of:
1. Brightness setting
2. Contrast setting
3. Color setting
• To change the image settings when using the outdoor unit on
battery, you first need to press the doorbell to have the image on
your monitor:
A. Use the arrow keys to select one of the available settings.
B. Press the menu button to confirm.