Operation And Function; Lux, Time, Meter Knobs - koban KDP5 Manual De Instrucciones

KDP5
Highbay presence detector
• Refer to wiring diagrams for correct wiring connection (See FIG.5 - FIG.8).
There is a square hole in the fixing plate, when you put the fixing plate into
the junction box, please fit the fillister to the junction box's protrusion
(See FIG.19), then fix the detector head on the power box following FIG.9
and assemble them with the attached 4pcs nondropping screws.
Protrusion
Square
hole
• Cover up the detector's decorative frame and restore the power supply.

Operation and function

Lux, Time, Meter knobs

Knob
Set the sensitivity of
detector
Set the light value
for switching on
load
Set delay off time
for lighting
Instructions manual |
FIG.19
Function
Range: Adjustable from "-" (approx. Φ4m)
to "+" (approx. Φ14m).
Range : Adjustable from approx.
10Lux to
level (10Lux - 2000Lux) can be read in.
Range: Adjustable from approx. 10sec
to 30min
Test : Test mode (Load and red LED
will be 2sec on, 2sec off)
timer switch control (Load will be 1sec
on, 9sec off)
32
Non-dropping
screw
Knob setting
(∞).
(learn): The actual ambient light
: Short impulse mode for staircase
www.grupotemper.com