Optional Accessory - koban KDP5 Manual De Instrucciones

Problem Possible cause
LED does not 1. No power is supplied.
turn on 2. Incorrect wiring.
Nuisance 1. Reflective metallic
triggering materials.
2. Vibration of installation
surface.

Optional accessory

It is strongly recommended to purchase our high quality IR remote controller
KDP for easy and safe setting operations on KDP5.
www.grupotemper.com
Highbay presence detector
Suggested solution
1. Switch on the power.
2. Connect the load referring
to the wiring diagrams (See
FIG.5 - FIG.8 ).
1. Check if the sensor is
aiming toward any reflective
metallic materials.
2. Check if the detector is
mounted on the vibrational
surface.
Instructions manual |
KDP5
35