Tripp-Lite PDUMNH20HV Manual Del Propietário página 6

3. Installation
3.1-3 0U Rack Mounting: Use three
screws to attach each of the two
shorter mounting brackets to the
PDU as shown. Mount the PDU
vertically by inserting two or more
user-supplied screws through
the mounting brackets and into
mounting points in the rack or rack
enclosure.
You may have to remove the
screws attaching the mounting
brackets to the PDU, change the
orientation of the brackets as
shown and reattach the brackets.
Use only the screws supplied by
the manufacturer or their exact
equivalent (#8-32, 3/16" flat
head). Attach the PDU vertically by
inserting two or more user-supplied
screws through the PDU mounting
brackets and into mounting points
in the rack or rack enclosure.
3.1-4
Wall Mounting: Use three screws
to attach each of the two shorter
mounting brackets to the PDU
as shown. Mount the PDU to
the wall by inserting two or more
user-supplied screws through the
mounting brackets and into secure
mounting points.
You may have tp remove the
screws attaching the mounting
brackets to the PDU, change the
orientation of the brackets as
shown and reattach the brackets.
Use only the screws supplied by
the manufacturer or their exact
equivalent (#8-32, 3/16" flat
head). Attach the PDU to a stable
mounting surface by inserting
two or more user-supplied screws
through the PDU mounting
brackets and into secure points on
the mounting surface.
16-11-159-933684.indb 6
3.1-3
PDUMNH20HV
3.1-3
PDUMNH20HV
3.1-4
PDUMNH20HV
3.1-4
PDUMNH20HV
6
1/3/2017 3:57:56 PM