Tripp-Lite PDUMNH20HV Manual Del Propietário página 9

3. Installation
3.2-2 NEMA Adapter Connection
(Optional - PDUMNH20HV Only):
The PDUMNH20HV includes a plug
adapter that adds a NEMA L6-20P
plug to the input power cord. Use
this adapter only if you will be
connecting the PDUMNH20HV to a
NEMA L6-20R outlet. Insert the
IEC 60320 C19 connector
the adapter into the IEC 60320
C20 connector
power cord. Secure the connection
with the retention bracket
using the included bolts to fasten
the two halves of the bracket
around the connection as shown.
Caution: To avoid the risk of
electric shock, ensure that the
Neutral (L2) conductor has been
identified before connecting the
PDU.
3.2-3
Input Power Cord Connection
(PDUMNH20HV Only): Insert the
IEC 60320 C19 connector
the input power cord into the IEC
60320 C20 inlet
Connect the other end of the input
power cord
source of AC power, such as a UPS
system, PDU or utility outlet. The
PDU should be provided with
over-current protection.
PDUMNH20HV should be provided
with a maximum 20A branch-rated
over-current protection device.
Note: The AC power source should
not share a circuit with a heavy
electrical load (such as an air
conditioner or refrigerator).
3.2-4
Connect Equipment to PDU: Do
not exceed the load rating of the
PDU. The total electrical current
used by the PDU will be displayed
on the digital meter in amperes.
Refer to: 2. Features, Digital Load
Meter (Ammeter) for details.
16-11-159-933684.indb 9
of
A
of the input
B
by
C
of
A
of the PDU.
B
to a compatible
C
3.2-2
3.2-2 C
88
C
3.2-3
PDUMNH20HV
3.2-4 PDUMNH20HV
3.2-4
PDUMNH30HV
9
C
A
B
B
A
1/3/2017 3:57:59 PM