Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance Procedures
7.
Re-engage the slide locking plungers
by moving the cab switch to the lock
position (Figure 26). If equipped with
manual slide release, pull the release
arm to allow the plungers to retract.
8.
Place the tractor into neutral and set the
parking brake.
9.
Visually inspect the plungers to ensure
proper engagement.
Figure 27 - ILS Sliders
Figure 28 - Traditional Sliders
10. Retract the landing gear legs, if lowered.
11. Verify that the slide locking plungers
have been re-engaged by performing a
pull test (Figure 29).
IMPORTANT: DO NOT operate the
vehicle if the plungers are
NOT fully engaged (locked).
Failure to properly engage
the plungers and slide
base could cause loss of
vehicle control which, if
not avoided, could result
in death or serious injury.
10. Fifth Wheel Maintenance
IMPORTANT: All maintenance MUST be
performed by a properly
trained technician using
proper tools and safe
procedures.
IMPORTANT: All maintenance MUST
be performed while the
tractor is uncoupled
from the trailer.
Failure to properly maintain
the fifth wheel could
result in tractor-trailer
separation which, if not
avoided, could result in
death or serious injury.
13
XL-FW10055UM-en-US Rev E · 2018-02-15 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
Figure 26
MOVE CAB SWITCH
TO LOCK POSITION
Figure 27
LOCKED (ENGAGED)
Figure 28
LOCKED
(ENGAGED)
RACK
TRADITIONAL SLIDERS (DISCONTINUED)
Figure 29
LOCK TRAILER BRAKES AND
PULL FORWARD WITH TRACTOR
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
AIR OPERATED
RACKS
PLUNGERS
ILS SLIDERS
PLUNGER
Publicidad
