Safety Messages To Maintenance Personnel - Federal Signal Global Serie Instrucciones De Instalación Y Mantenimiento

6. Connect the ground wire to the position marked
terminal block.
7.
Secure the cover on the terminal box with the four M4
screws. Ensure that the gasket is properly seated to maintain
IP rating. Do not overtighten the screws

Safety Messages to Maintenance Personnel

Listed below are some important safety instructions and precautions
you should follow:
• Read and understand all instructions before operating this system.
• Repair of flamepaths is not recommended.
• If you acquired a significant quantity of units, it is recommended
that spares are also made available.
• Any maintenance to the loudspeaker system must be performed by
a trained electrician who is thoroughly familiar with all applicable
national and local codes in the country of use.
• Any maintenance to the loudspeaker system must be done with
power/audio source turned off.
• Check the loudspeaker periodically that to ensure that the
effectiveness of the device has not been reduced because it has
been clogged with a foreign substance or because objects have
been placed in front of it.
• Never alter the unit in any manner. Safety of the unit may be
affected if additional openings or other alterations are made to the
internal components or housing.
• The nameplate, which may contain cautionary or other information
of importance to maintenance personnel, should NOT be obscured
in any way. Ensure that the nameplate remains readable.
Model G-SPK Global Series Loudspeaker
Installation and Maintenance Instructions
on the
19