Setting-Up A Square Wave Clock Signal; Open Waveform Menu - Square - Aim TTi TGF4000 Serie Guia De Inicio Rapido

5 - Basic Set-up Examples

Setting-up a Square Wave Clock Signal

Setting-up a Square Wave Clock Signal
Requirement
Output a continuous square wave clock signal with 20MHz frequency, 50% duty cycle and a high
level of 3.3V and a low level of 0.0 volts from MAIN OUT 1.
Starting Conditions
Before starting, reset the instrument to defaults as described in section 4 Getting Started

Open Waveform Menu - Square

Press the hard key marked Waves
•
Press the soft-key labelled Square.
•
+
14 TGF4000 Series Quick Start Guide