Setting-Up A Pulse Waveform; Open Waveform Menu - Pulse - Aim TTi TGF4000 Serie Guia De Inicio Rapido

5 - Basic Set-up Examples

Setting-up a Pulse Waveform

Setting-up a Pulse Waveform
Requirement
Output a continuous pulse signal with 100ns period, 30ns pulse width, 20ns edge times and a high
level of 2.7V and a low level of -0.6 volts from MAIN OUT 1.
Starting Conditions
Before starting, reset the instrument to defaults as described in section 4 Getting Started

Open Waveform Menu - Pulse

Press the hard key marked Waves
•
Press the soft-key labelled Pulse.
•
20 TGF4000 Series Quick Start Guide