Troubleshooting And Care; Error Messages; Technical Characteristics - hager TX460 Instrucciones De Uso

10. Troubleshooting and care

10.1 Error messages

Invalid BCU or application
When this message is displayed, disconnect and then
reconnect front face.
Check:
- That the used BCU is suitable for
environment control and regulation
BCU TX460.
- That application software is suitable
for the environment control and
regulation and that temperature was
actually downloaded.
Product care
Clean the environment control and regulation using a clean,
soft and wet rag. Do not use alcohol, aerosol cleaner or similar
products containing solvent or abrasive material likely to
damage the environment control and regulation finish.
108

10. Technical characteristics

Supply voltage 30 V DC SELV
Current consumption ≈ 7,5 mA (without backlighting)
at 30 V ≈ 15 mA (with backlighting)
Max. power dissipation ≈ 430 mW (with backlighting)
Overall dimensions ≈ 80,5 x 80,5 x 15,4 mm
(excluding BCU)
Connection bus connection terminal
0,6 to 0,9 mm
Mounting in diameter 60 mm
connection box depth 40 mm minimum
Protection grade IP20
Built-in temperature accuracy of temperature
sensor measurement: +/- 0.5 °C
Range of measurement 0°C to +45°C
Operating temperature 0°C to +45°C
Storage Temperature -20°C to +70°C
Weight 112,3 g
EN 50090-2-2
CEM
EN 55022
EN 55024
EN 60669-2-1
109
2
rigid wire