Driving To The Place Of Use; Cleaning Programs; Setting The Vacuum Bar; Setting The Advance Speed - Kärcher BR 40/25 C Ep Manual De Instrucciones

play. Maximum temperature of the liquid
60°C.
Close the cover of the fresh water reser-
voir.

Driving to the place of use

When the running gear is turned to the front,
the appliance can be pushed to the place of
use without the brushes touching the floor.
Raise the vacuum bar.
Press the appliance down using the push
handle.
Turn the running gear to the front with
your foot.
Use the push handle to push the appli-
ance to the place of use.

Cleaning programs

3
2
1
1 OFF Appliance is switched off.
2 Scrubbing/vacuuming operation Wet
cleaning of floor and vacuuming of dirty
water.
3 Wet scrubbing Wet cleaning of floor, al-
lowing detergent to take effect.
4 Vacuuming Vacuuming up dirty fluid.
5 Polishing Polishing the floor without ap-
plying liquid.

Setting the vacuum bar

Oblique position
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Release the wing nuts.
4
5
Turn the vacuum bar.
Tighten the wing nuts.
Inclination
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Release the wing nuts.
Tilt the vacuum bar.
Tighten the wing nuts.
Setting the advance speed (BD
model only)
Turn the running gear to the front with
your foot.
9
English