Determining The Installation Position - Dictator DICTAMAT 50 BK-Z Manual Tecnico

1) Determining the
Installation Position
Door closing to the right
IMPORTANT: When choosing the fixing point of the rope of the spring rope pulley, you have to make
sure the working travel of the spring rope pulley allows the complete travel of the door!
Damping
clockwise
Door closing to the left
© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail info@dictator.de • 201812
C) Installation of the DICTAMAT 50 BK-Z
With the DICTAMAT 50 BK-Z the spring rope pulley can be installed
either on the left or right side of the door. Usually the radial damper
LD 50 is installed beside the spring rope pulley (see ill. 3a and 3b). In
case of space problems e.g. the positions of the radial damper and the
idler pulley can be exchanged.
The closing direction determines the position of the spring rope pulley.
With a DICTAMAT 50 BK-Z the door always closes towards the spring
rope pulley. I.e. when it is mounted on the right, the door closes to the
right. The same applies when the spring rope pulley is mounted on the
left side of the door.
The damping direction shown below has to be observed when in-
stalling the radial damper according to point C2!
Technical Manual
DICTAMAT 50 BK-Z
Damping
anticlockwise
Ill. 3a
Ill. 3b
Page 02.090.03