Filter Cleaning - Kenmore 116.39050 Manual De Uso Y Cuidado

PRIMARY FILTER CLEANING
it is recommended to clean filter with
cold water at least every three (3)
months.
Check the primary filter frequently and
clean when dirty,
Rear
1. Remove the
rear cover by
pressing the
tabs located
on each side,
2. Lift cover off
of vacuum
cleaner
3o Remove the
primary filter from
the rear cover,
4. Wash with cold
water only, DO NOT
use detergent or
soap
Primary
Filter
Ro°r
I
Cover---__
5, Once the filter is washed clean, squeeze
by hand and allow to air dry,
6, Allow filter to dry 24 hours before putting
back into vacuum cleaner,
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filten
DO NOT operate without primary filter
installed.
DO NOT wash in the dishwasher,
DO NOT install damp.
4. Reinstall the foam filter into the rear
cover,
5. Reinstall the rear cover by snapping into
place on the back of the vacuum cleaner, A
noticeable "click" should be heard
2O