Vacuum Cleaner; Handle; Attachment Assembly - Kenmore 116.39050 Manual De Uso Y Cuidado

ATTACHMENT ASSEMBLY
HOSEAND WAND
1, Insert the tab on
the telescopic wand
into the "J" slot on the
hose handle. Twist
the telescopic wand
to lock in place°
2. Place the telescop-
ic wand in the wand
holder and route the
hose as shown.
Hose /
Holder _( /
Raised
Edge
Hose
Handle
3, Snap the
hose handle
into the hose
holder located
on the handle
of the vacuum
cleaner_
NOTE: Be
sure the raised
edge of the
hose handle
rests against
edge of the
hose holder,
4, Rotate the
hose release
lever down and
route the hose
as shown
5, Snap the
hose into the
hose cuff on
the side of the
vacuum cleaner
Hose
Telescopic
Wand
Hose
Release
Hose
Release
6, Rotate the hose
release lever
upwards to lock
the hose in place
PET HANDI MATE
TM
For operation of Pet Handi Mate
TM
see
separate Use & Care Guide,
1, Place Pet
Handi Mate
TM
into the storage
area
2. Rotate the Pet
Handi Mate
TM
back until it
snaps into place,
Pet
Ha n dl Mate
TM
CREVICE TOOL
t, Insert the
crevice tool into
the holder on the
side of the vacu-
um cleaner as
shown.
COMBINATION BRUSH
1, Insert the
combination
brush into
the holder
on the back
of the
vacuum
cleaner as
shown.