Dust Cup Emptying - Kenmore 116.39050 Manual De Uso Y Cuidado

DUST CUP EMPTYING
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum cleaner,
TO REMOVE DUST CUP
Lift dust cup
handle located at
the top of the
dust cup.
Pul! the handle
up and lift dust
cup up and out of
the vacuum
cleaner_
Dust Cup
Release
Handle
Filter
Suction
Remove any
clogs that might
be located in the
suction port or
filter port area_
TO EMPTY DUST CUP
1. Rotate dust
cup handle to
the vertical
position
2. Hold dust
cup over a
trash container
3. Press the
dust cup door
release button
downward to
release the
door.
Cup
Door
Release
Button
Emptying
Door
The door will swing open and the debris
wilt fall into the trash container.
4. Shake the dust cup to release any
debris that might hang in the pre-fiiten
Door
Door
Latch
5. After the dust
cup is empty of
debris, firmly
close the door
Make sure you
hear a "click"
sound to indicate
that the door is
fully latched.
TO REPLACE DUST CUP
Place dust cup back
into vacuum cleaner
by inserting the
bottom first and tilting
back with the dust
cup handle raised.
Lower the
dust cup
handle to lock
dust cup in
place
A noticeable
"click" should
be heard
t7