Cleaning And Care - Carrera 655 Manual De Instrucciones

The appliance is equipped with a heat retention function. It remains active
● ●
for 20 minutes after completion of programmes
temperature is 80 °C.
The temperature and the remaining heat retention time are shown on the
display. Programme
mixes and stirs at intervals during the heat retention period.
The appliance only works with properly closed glass jar. The blending pro-
● ●
cess will be interrupted immediately when the lid is being lifted.
The blender is equipped with electronic temperature control. The heat will
● ●
increase and decrease during the cooking process.
Any food sticking to the glass jar must be removed during the cooking pro-
● ●
cess using the plastic scraper
opening and take off the food sticking to the glass wall.
CAUTION:
It is vital to ensure that the lid and dosing cap remain closed when
cooking or mixing hot ingredients.
No parts except for the included plastic scraper
● ●
into the glass jar during the blending process. Contact with the rotat-
ing knife may have fatal consequences.
Use the silicone scraper
● ●
from the motor base.

07. CLEANING AND CARE

DANGER!
Danger to life due to electric shock!
Danger to life when live wires or parts are touched! The following safety in-
structions must therefore be observed:
Always unplug before cleaning.
● ●
Never immerse the appliance in water.
● ●
WARNING!
Risk of burns caused by hot appliance parts!
Parts of the appliance may still be hot and cause burns even after the appli-
ance has been switched off. It is thus vital to allow the appliance to cool down
completely before cleaning it.
B
is the only programme during which the blender
12 . To do so, slide the scraper through the lid
13 only after the glass jar has been removed
A / B / D + E ; the
12 must be inserted
GB 37